ATA-3
E39010
ATA-3 is the third generation of the AT Attachment (ATA) interface standard for connecting storage devices like hard drives and optical drives to computers, introducing enhancements in performance and reliability over earlier versions.
All labels observed (2)
| Label | Occurrences |
|---|---|
| ATA-3 canonical | 4 |
| AT Attachment-3 | 1 |
How this entity was disambiguated
This entity first appeared as the object of triple T299799 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
NED1
Entity disambiguation (via context triple)
gpt-5-mini-2025-08-07
Target entity: ATA-3 Context triple: [ATA, version, ATA-3]
-
A.
ATA-1
ATA-1 is the first generation of the ATA (AT Attachment) interface standard used to connect storage devices like hard drives and optical drives to a computer’s motherboard.
-
B.
Titan IIIE
Titan IIIE was a U.S. expendable launch vehicle variant of the Titan III family, equipped with a Centaur upper stage and used in the 1970s to send deep-space probes such as Voyager 1 on interplanetary trajectories.
-
C.
CT-156 Harvard II
The CT-156 Harvard II is a turboprop military trainer aircraft used by the Royal Canadian Air Force for pilot training and skill development.
-
D.
ATA
ATA (Advanced Technology Attachment), commonly known as IDE, is a standard interface used to connect storage devices like hard drives and optical drives to a computer's motherboard.
-
E.
AeroGaviota
AeroGaviota is a Cuban airline that primarily serves domestic and tourist-oriented routes, often connecting major hubs like Havana with resort and regional destinations across the country.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
NED2
Entity disambiguation (via description)
gpt-5-mini-2025-08-07
Target entity: ATA-3 Target entity description: ATA-3 is the third generation of the AT Attachment (ATA) interface standard for connecting storage devices like hard drives and optical drives to computers, introducing enhancements in performance and reliability over earlier versions.
-
A.
ATA-1
ATA-1 is the first generation of the ATA (AT Attachment) interface standard used to connect storage devices like hard drives and optical drives to a computer’s motherboard.
-
B.
Titan IIIE
Titan IIIE was a U.S. expendable launch vehicle variant of the Titan III family, equipped with a Centaur upper stage and used in the 1970s to send deep-space probes such as Voyager 1 on interplanetary trajectories.
-
C.
CT-156 Harvard II
The CT-156 Harvard II is a turboprop military trainer aircraft used by the Royal Canadian Air Force for pilot training and skill development.
-
D.
ATA
ATA (Advanced Technology Attachment), commonly known as IDE, is a standard interface used to connect storage devices like hard drives and optical drives to a computer's motherboard.
-
E.
AeroGaviota
AeroGaviota is a Cuban airline that primarily serves domestic and tourist-oriented routes, often connecting major hubs like Havana with resort and regional destinations across the country.
- F. None of above. chosen
Statements (49)
| Predicate | Object |
|---|---|
| instanceOf |
ATA standard
ⓘ
computer hardware interface standard ⓘ storage interface ⓘ |
| alsoKnownAs |
ATA-3
ⓘ
surface form:
AT Attachment-3
ATA-3 standard ⓘ Parallel ATA ⓘ
surface form:
Ultra ATA
Parallel ATA ⓘ
surface form:
Ultra DMA
|
| backwardCompatibleWith |
ATA-1
ⓘ
ATA-2 ⓘ |
| busWidth | 16-bit data bus ⓘ |
| connectorType | 40-pin ribbon cable connector ⓘ |
| dataEncoding | parallel data transfer ⓘ |
| defines |
command protocol for ATA devices
ⓘ
electrical interface for ATA devices ⓘ timing modes for ATA data transfers ⓘ |
| designGoal |
better data integrity
ⓘ
higher throughput ⓘ improved device monitoring ⓘ |
| era | mid-1990s ⓘ |
| extends |
Parallel ATA
ⓘ
surface form:
AT Attachment Packet Interface (ATAPI)
|
| follows | ATA-2 ⓘ |
| improvesOver |
ATA-2 in performance
ⓘ
ATA-2 in reliability ⓘ |
| interfaceType |
Parallel ATA
ⓘ
surface form:
parallel ATA
|
| introduces | Ultra DMA transfer modes ⓘ |
| maxTransferRate | 33 MB/s ⓘ |
| partOf |
ATA
ⓘ
surface form:
AT Attachment
|
| precedes | ATA-4 ⓘ |
| standardizedBy |
ANSI
ⓘ
INCITS ⓘ |
| supportsDeviceType |
CD-ROM drive
ⓘ
DVD drive ⓘ magnetic hard disk drive ⓘ tape drive (via ATAPI) ⓘ |
| supportsFeature |
48-bit LBA (note: later ATA revisions extend LBA further)
ⓘ
CRC for data transfers ⓘ PIO modes ⓘ S.M.A.R.T. ⓘ Self-Monitoring, Analysis and Reporting Technology ⓘ Ultra DMA mode 0 ⓘ Ultra DMA mode 1 ⓘ Ultra DMA mode 2 ⓘ improved error detection ⓘ multiword DMA modes ⓘ |
| targetPlatform |
personal computers
ⓘ
workstations ⓘ |
| usedFor |
connecting hard disk drives
ⓘ
connecting optical drives ⓘ connecting removable storage devices ⓘ |
How these facts were elicited
The pipeline generated the facts above by prompting gpt-5.1 with this entity's name + description and the instruction below.
Instruction
You are a knowledge base construction expert. Given a subject entity and a description of it, return factual statements that you know for the subject as a JSON list of dictionaries(triples), where keys must be "subject", "predicate" and "object". The number of facts may be very high, between 25 to 50 or more, for very popular subjects. For less popular subjects, the number of facts can be very low, like 5 or 10. # Requirements - If you don't know the subject at all, return an empty list. - If the subject is not a named entity, return an empty list. - Include at least one triple where predicate is "instanceOf". - Do not get too wordy. - Separate several objects into multiple triples with one object.
Input
Subject: ATA-3 Description of subject: ATA-3 is the third generation of the AT Attachment (ATA) interface standard for connecting storage devices like hard drives and optical drives to computers, introducing enhancements in performance and reliability over earlier versions.
Referenced by (5)
Full triples — surface form annotated when it differs from this entity's canonical label.
this entity surface form:
AT Attachment-3