IEEE 802.1Qcy
E171922
IEEE 802.1Qcy is an amendment to the IEEE 802.1Q standard that specifies frame replication and elimination for reliability in Time-Sensitive Networking (TSN) Ethernet networks.
All labels observed (2)
| Label | Occurrences |
|---|---|
| 802.1Qcy | 1 |
| IEEE 802.1Qcy canonical | 1 |
How this entity was disambiguated
This entity first appeared as the object of triple T904727 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
Target entity: IEEE 802.1Qcy Context triple: [IEEE 802.1Q Time-Sensitive Networking amendments, includes, IEEE 802.1Qcy]
-
A.
IEEE 802.1Qfy
IEEE 802.1Qfy is an Ethernet networking standard that defines mechanisms for flow filtering and policy-based forwarding to enhance traffic management and virtualization in bridged networks.
-
B.
IEEE 802.1Qfa
IEEE 802.1Qfa is an amendment to the IEEE 802.1Q standard that specifies enhancements for deterministic, time-sensitive networking in bridged Ethernet networks.
-
C.
IEEE 802.1Qfe
IEEE 802.1Qfe is a specific amendment within the IEEE 802.1 family that defines enhancements to Ethernet bridging and related network management functions.
-
D.
IEEE 802.1Qfc
IEEE 802.1Qfc is an amendment to the IEEE 802.1Q standard that specifies enhancements for frame preemption and traffic scheduling in Time-Sensitive Networking (TSN) Ethernet networks.
-
E.
IEEE 802.1Qex
IEEE 802.1Qex is an amendment to the IEEE 802.1Q standard that enhances Ethernet bridging by adding advanced features for traffic engineering and improved control of data paths in bridged networks.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
Target entity: IEEE 802.1Qcy Target entity description: IEEE 802.1Qcy is an amendment to the IEEE 802.1Q standard that specifies frame replication and elimination for reliability in Time-Sensitive Networking (TSN) Ethernet networks.
-
A.
IEEE 802.1Qfy
IEEE 802.1Qfy is an Ethernet networking standard that defines mechanisms for flow filtering and policy-based forwarding to enhance traffic management and virtualization in bridged networks.
-
B.
IEEE 802.1Qfa
IEEE 802.1Qfa is an amendment to the IEEE 802.1Q standard that specifies enhancements for deterministic, time-sensitive networking in bridged Ethernet networks.
-
C.
IEEE 802.1Qfe
IEEE 802.1Qfe is a specific amendment within the IEEE 802.1 family that defines enhancements to Ethernet bridging and related network management functions.
-
D.
IEEE 802.1Qfc
IEEE 802.1Qfc is an amendment to the IEEE 802.1Q standard that specifies enhancements for frame preemption and traffic scheduling in Time-Sensitive Networking (TSN) Ethernet networks.
-
E.
IEEE 802.1Qex
IEEE 802.1Qex is an amendment to the IEEE 802.1Q standard that enhances Ethernet bridging by adding advanced features for traffic engineering and improved control of data paths in bridged networks.
- F. None of above. chosen
Statements (42)
| Predicate | Object |
|---|---|
| instanceOf |
IEEE standard amendment
ⓘ
Time-Sensitive Networking standard ⓘ |
| aimsTo |
increase reliability of time-sensitive traffic
ⓘ
support fault tolerance in TSN networks ⓘ |
| appliesTo |
Ethernet networks
ⓘ
Time-Sensitive Networking ⓘ |
| belongsToFamily |
Time-Sensitive Networking
ⓘ
surface form:
IEEE 802 Time-Sensitive Networking
IEEE 802.1Q VLAN tagging standard ⓘ
surface form:
IEEE 802.1Q VLAN Bridging
|
| contributesTo |
Time-Sensitive Networking profile for industrial automation
ⓘ
reliable delivery of critical data streams ⓘ |
| defines |
IEEE 802.1CB Frame Replication and Elimination for Reliability
ⓘ
surface form:
Frame Replication and Elimination for Reliability (FRER)
configuration options for redundant paths ⓘ frame elimination for reliability ⓘ frame replication for reliability ⓘ management parameters for FRER ⓘ |
| extends |
TSN stream handling in bridges
ⓘ
VLAN-aware bridging behavior ⓘ |
| hasAbbreviation |
IEEE 802.1Qcy
self-linksurface differs
ⓘ
surface form:
802.1Qcy
|
| hasWorkingGroup |
IEEE 802.1 standards family
ⓘ
surface form:
IEEE 802.1
|
| layer | Data Link Layer ⓘ |
| objective |
minimize packet loss for time-sensitive streams
ⓘ
provide seamless recovery from single network failures ⓘ |
| partOf |
IEEE 802.1Q series
ⓘ
surface form:
IEEE 802.1Q
|
| publishedBy |
Institute of Electrical and Electronics Engineers
ⓘ
surface form:
IEEE
IEEE 802.1 Working Group ⓘ |
| relatedTo |
IEEE 802.1CB
ⓘ
IEEE 802.1Qbv ⓘ IEEE 802.1Qch ⓘ IEEE 802.1Qci ⓘ IEEE 802.1Qcr ⓘ |
| specifies |
bridge and end-station behavior for FRER
ⓘ
mechanisms for elimination of duplicate frames ⓘ mechanisms for redundant transmission of Ethernet frames ⓘ procedures for improving reliability of TSN streams ⓘ |
| supports |
deterministic communication in Ethernet
ⓘ
high-availability networking ⓘ |
| technologyDomain |
computer networking
ⓘ
real-time Ethernet ⓘ |
| usedIn |
aerospace Ethernet networks
ⓘ
automotive Ethernet networks ⓘ industrial Ethernet networks ⓘ professional audio-video networks ⓘ |
How these facts were elicited
The pipeline generated the facts above by prompting gpt-5.1 with this entity's name + description and the instruction below.
You are a knowledge base construction expert. Given a subject entity and a description of it, return factual statements that you know for the subject as a JSON list of dictionaries(triples), where keys must be "subject", "predicate" and "object". The number of facts may be very high, between 25 to 50 or more, for very popular subjects. For less popular subjects, the number of facts can be very low, like 5 or 10. # Requirements - If you don't know the subject at all, return an empty list. - If the subject is not a named entity, return an empty list. - Include at least one triple where predicate is "instanceOf". - Do not get too wordy. - Separate several objects into multiple triples with one object.
Subject: IEEE 802.1Qcy Description of subject: IEEE 802.1Qcy is an amendment to the IEEE 802.1Q standard that specifies frame replication and elimination for reliability in Time-Sensitive Networking (TSN) Ethernet networks.
Referenced by (2)
Full triples — surface form annotated when it differs from this entity's canonical label.